Casa > Produtos >

5290R 2W/mK Thermal Conductive Silicone Potting Compound 1:1 Mix Ratio

5290R 2W/mK Thermal Conductive Silicone Potting Compound 1:1 Mix Ratio

Detalhes do produto:

Lugar de origem:	China
Marca:	Huitian
Certificação:	ROHS REACH
Número do modelo:	5290

Informações detalhadas

Lugar de origem:

China

Marca:

Huitian

Certificação:

ROHS REACH

Número do modelo:

5290

Cor Parte A:

vermelho

Cor Parte B:

Branco

Viscosidade Parte A:

4.500 ~ 7.000 MPa · s

Viscosidade Parte B:

4.000 ~ 6.500 MPa · s

Mix Ratio:

1: 1

Densidade Parte A:

2,7 ~ 2,8 g/ml

Densidade Parte B:

2,7 ~ 2,8 g/ml

Vida de validade:

6 meses

Temperatura de trabalho:

-50 a 200°C

Destacar:

5290R thermal conductive potting compound , silicone potting compound 2W/mK , 1:1 mix ratio electronic potting

Informações de negociação

Quantidade de ordem mínima:

1000 kg

Preço:

Negociável

Detalhes da embalagem:

20kg/conjunto: A: 10kg/balde, b: 10kg/balde.

Habilidade da fonte:

100 mt/mês

Descrição do produto

5290R 2W High Thermal Conductive 1:1 Mix Red/White Silicone, UL94V-0, -50°C To 200°C

Ideal for electronics encapsulation, automotive module sealing, sensor potting & circuit board protection.

Product Overview

The 5290R(A9B9) is a high-performance, two-part addition-type potting silicone rubber designed for electronic and electrical applications. Combining exceptional thermal conductivity with excellent flow properties, this product offers both thermal management and mechanical protection. The red/white 1:1 mixing ratio ensures simple and consistent application.

Key Applications

Inverter Inductance: Provides thermal management and mechanical protection
Military Power Supplies: Ensures reliable performance in harsh environments
Communication Modules: Offers moisture-proof and shockproof protection
General Electronics: Suitable for transformers, capacitors, and PCBs

Product Features

High Thermal Conductivity

2 W/m*K thermal conductivity for efficient heat dissipation

Excellent Flow Properties

Viscosity range: 4,500-7,000 mPa*s (Part A), 4,000-6,500 mPa*s (Part B)

Dual Curing Mechanism

Cures at room temperature (≤6 hours) or accelerated with heat (≤30 minutes at 80°C)

Superior Insulation

Dielectric strength ≥13 KV/mm, volume resistivity ≥1.0×10^12 Ω*cm

Wide Temperature Range

Maintains elasticity from -50°C to 200°C

Safety Compliance

UL94V-0 flame retardant, RoHS compliant

Technical Specifications

Physical Properties Before Curing (25 ±2℃, 60%±5%RH)
Appearance (A)	-	Red flow
Appearance (B)	-	White flow
Viscosity (A)	mPa*s	4,500~7,000
Viscosity (B)	mPa*s	4,000~6,500
Density (A)	g/cm^3	2.7~2.8
Density (B)	g/cm^3	2.7~2.8
Curing Properties (A:B=1:1)
Operating Time	min	130±70
Curing Time (25℃)	h	≤6
Curing Time (80℃)	min	≤30
Physical Properties After Curing (A:B=1:1)
Hardness	Shore A	35~45
Dielectric Strength	KV/mm	≥13
Volume Resistivity	Ω*cm	≥1.0×10^12
Dielectric Constant (1.2MHz)	-	≥2.8
Thermal Conductivity	W/m*K	2±0.2

Application Instructions

Preparation

Stir Part A and Part B separately to ensure uniformity before mixing.

Mixing

Weigh components in 1:1 ratio and mix thoroughly for homogeneous consistency.

Defoaming

Natural Defoaming: Allow 20-30 minutes for air bubble release
Vacuum Defoaming: 5-10 minutes at -0.1 MPa vacuum

Potting

Apply to clean, dry surfaces while mixture maintains good flowability.

Curing

Room temperature or heat accelerated curing available. Higher temperatures reduce curing time.

Packaging & Storage

Packaging: 5290RA9 20kg/barrel, 5295RB9 20kg/barrel

Storage: 8-28°C in cool, dry location. 6 month shelf life when properly stored.

Safety Information

Store in sealed containers away from children. Avoid contact with N, P, S organic compounds and Sn, Pb, Hg, As ionic compounds which may inhibit curing. Consult MSDS for complete safety details.

Application example of 5290R Silicone Potting Compound

5290R Silicone Potting Compound packaging

Technical specifications of 5290R Silicone Potting Compound

Etiquetas:

download